Roofing contractors avoid performing roading projects in the rain. Roofing materials, such as underlayment, shingles, and felt, can get wet, and these can warp and bulge. Rainwater can cause damage to the underlayment and to the shingles. This can ruin the warranty for your shingles. Listed below are some tips for avoiding rain during loading.
1- Roofers avoid rain-related routine jobs
In the Bay Area, where rain is a common problem, roofing contractors can easily avoid doing work on your roof during rainstorms. While residential roofing services schedule their jobs during sunny weather, you can expect unexpected rainstorms to pop up during your roofing project. Although they may have made plans to prepare for such events, it is best not to work in rain. To ensure quality results, roofing contractors should not work in the rain.
Roofing contractors carefully monitor the weather during roofing projects. Rain can interfere with the quality of the installation, causing shingles to be slippery and dangerous to work on. Because of this, most contractors will call you to reschedule the project for another time. Roofing contractors should always avoid roofing projects during the rain if possible, so they can ensure safety for their crews. Roofing contractors also avoid working during rainy weather for several reasons.
2- Roofing felt can get wet
When laying shingles, take precautions to prevent wet roofing felt from damaging shingles. Wet roofing felt traps moisture and can cause mold growth underneath the shingles. Wet roofing felt may also compromise the protective sheathing beneath the shingles. Proper roofing felt installation will ensure your roof lasts over twenty years.
The best time to install your roofing felt is before it lay the shingles. The felt must be completely dry before you instal shingles. A wet roofing felt may tear or wrinkle when shingles are installed. This can cause A leaky roof. Roofing felt prevents ice dams and is an important protective barrier between the outer layer of the roof and the decking.
3- Roof shingles may bulge or warp.
Roof shingles cover your roof. When they are damaged, they may start curling edges or warping. Sometimes, these shingles need to be replaced entirely. No matter what the reason, inspect your shingles every so often. A bulging or warped shingle may show A rotten roof. It is important to find damaged shingles before you hire a roofer to do a full replacement.
Some homeowners might think that the rain have damaged their shingles, but they are not necessarily at fault. Wet roofing needs to be dried before it is covered, or it could lead to mold and mildew formation. Shingles that are exposed to the elements can also lose their granules, warp, and bulge. This could also cause baldness or loss of granules on the shingles.
4- Roofing underlayment can get wet
During the installation of the shingles, the roofing underlayment may get wet as well. Although the roofing underlayment may keep its integrity for several days, sunlight and moisture will damage it. Therefore, if you are planning to lay your shingles during rainy seasons, be sure to choose the right roofing underlayment. There are two types of felt underlayment: the twenty-pound and the thirty-pound felt. For six to twelve months, thicker felt can protect your roof and resist UV damage.
A roofing underlayment might not be the right choice depending on where you live. While tar felt is cheap, it does not handle extreme weather conditions, as well as synthetic underlayment, does. When choosing to roof underlayment, it is important to consider your financial budget. A good quality underlayment will not only prolong the life of the roof but also keep the house safe and moisture-free. It's easier to stop water penetration and repair it later.
